TITLE:
3D printer ZPrinter 310
DESCRIPTION:
Description: By using 3D-print technologies, the final products are built by applying base material in layers due to digital geometric models. ZPrinter 310 Plus is based on the binder jetting of a chosen powder material. The ZPrint Software first converts a three-dimensional CAD design (file formats for printing: STL, VRML, PLY, 3DS) into cross-sections or slices that are between 0.0889 – 0.2032 mm thick. The 3D printer using an additive technology, which applies one layer after another from the bottom to the top of the design. The process starts with the application of powder from the storage tank to the building surface, with dimensions 203×254×203 mm. Described process is repeated until desired 3D geometric model is created.
More: http://en.zag.si/si/projekti-zag/z2-1861
Contact: PhD Lidija Korat, T: 01 2804 538, lidija.korat@zag.si
p_brosura_3Dp-sl.pdf
More: http://en.zag.si/si/projekti-zag/z2-1861
Contact: PhD Lidija Korat, T: 01 2804 538, lidija.korat@zag.si
p_brosura_3Dp-sl.pdfPURCHASE DATE:
20.08.2019
IMAGES:
